Panasonic FP-D350, Руководство пользователя

Страница: 20 / 83

21
Setting up Print Condition
For Windows 3.1
ATTENTION
(1) Option
■
Other print conditions can be setup by opening Printers dialog and pressing Option button.
No Item Default setting Setting
# Output Bin Bin 1 Select the paper exit bin from the printer
when using FA-F320/F350/TR355 (option).
$ Output Order Ascending Ascending: Paper exit from the first page.
Descending: Paper exit from the last page.
*
3
% Output Form Face Down
Face Up: Print with print side up.
Face Down: Print out with print side down
& Sorter
*
1
Stack Stack (Group): Multiple prints of each original
are placed into separate bins.
Sort: 1 sheet of each original is placed into
a separate bin.
(available only selecting the sort mode)
Rotate:Grouped or sorted sheets are
separated, rotated and exit onto tray.
Shift: Grouped or sorted sheets are offset
and exit onto tray.
( Staple
* 1
None
You can only use staple mode when sort or
stack is selected.
None, Left-1, Left-2, Right-1, Right-2
(FA-F320: Left corner only)
) Duplex
* 1
(with Automatic
duplex unit)
None
None: It enables double sided printing.
Flip on Long Edge: Regular book format
Flip on Short Edge: Sketch book or legal pad format
(Rotate mode of sorter can not be used)
* Booklet
* 2
(When duplexing)
Off
Booklet making using the Automatic duplex unit.
It allows use with Filing settings.
Off
On: Prints will come out in book style. When
this setting is selected the Off, the setting
is changed to the None.
Paper Source: Paper size setting (must be set)
(Ledger/Letter/A3/A4 only)
(Staple and Punch mode can not be used)
+ Punch None When using 2-bin finisher (option), it enables
hole punch printing.
(Rotate mode of sorter can not be used)
C
Print quantity in the electronic sort mode should be set by either application software
or printer setting dialog box. If it is selected by both setting, print quantity will be
multiple quantity by both settings.
∗
1 All sorting selections, duplex and staple modes must be made at the printer driver screen.
The collate option must be turned off in the application software.
∗
2 When using the booklet mode, descending and face down mode can not be used.
∗
3 Descending mode of output order is selected:
If the printer image memory is full, change to the ascending mode or print the document
separately.
P20-21-Pos.p65 11/24/99, 2:57 PM 21