8-ENGLISH
Projection relationships
The dimensional relationship between the screen and the projector is shown below.
■
Dimensional relationship diagram
L1
L (LW/LT)
L (LW/LT)
SW
SH
H
SH
SW
SD
L1
Projected image
Screen
Note
z
This diagram assumes that the size and position of the projected image will be adjusted so
that the image fills the entire screen.
z
This illustration is not drawn to scale.
L
Projection distance
LW
Minimum distance
LT
Maximum distance
L1
Lens protrusion dimension
SH
Projected image height
H
Distance from the lens center to the lower edge of the projected image
SW
Projected image width
SD
Projected image size
(Unit: m)
Projector model
Dimension for L1
(approximate value)
PT-FRZ98C / PT-FRW93C / PT-FRX110C / PT-FRZ78C /
PT-FRW73C / PT-FRZ67C / PT-FRW62C / PT-FDZ97C /
PT-FDW93C / PT-FDX110C
0.104
PT-FDZ88C / PT-FDW85C / PT-FDX92C / PT-FD605CB /
PT-FD601C
0.084
Note
z
The illustrations of projectors in this manual are for informational purposes only and do not
represent a specific projector model. Configurations may vary with the model.
z
Some of the alphabet letters at the end of projector model numbers may be omitted in this
manual.