We recommend that you clean your shaver with the self-cleaning recharger or the “sonic” vibration
turbo-cleaning mode when the faucet symbol appears on the LCD panel.
1.
Disconnect the power cord from the shaver.
2.
Apply some hand soap and some water to the outer foil.
3.
Press the OFF/ON switch for more than 2 seconds to activate the turbo mode for “sonic”
vibration cleaning.
o
For models ES-8103, ES-8243,
appears on the LCD panel.
o
For model ES-LT3N, ES-LT5N, the battery capacity lamps blink in order.
o
After about 20 seconds, it will be automatically turned off, or you can turn it off by
pressing the OFF/ON switch.
4.
Remove the outer foil section and press the OFF/ON switch for more than 2 seconds to
activate the turbo mode for “sonic” vibration cleaning and clean it with running water
o
For model ES-LT3N, this will activate the sonic vibration cleaning mode.
5.
Wipe off any drops of water with a dry cloth.
6.
Remove the outer foil section to allow it to dry completely
Caution for turbo mode (ES-8103, ES-8243)
Shaving in turbo mode may damage your skin. Turn the shaver off and then on again to cancel
turbo mode.
Do not place your fingers on the OFF/ON switch while using the shaver. This may cause the
shaver to turn off or enter turbo mode. Place your fingers on the finger rest while using the
shaver.