Panasonic ES-LV9Q, Руководство по эксплуатации, Страница: 19 / 430

19
TR
RO
H
SK
CZ
PL
FIN
S
N
P
DK
E
NL
I
F
D
GB
4
Attach the outer foil section
and dry with the self-cleaning
recharger [
B
]�
1. Insert the shaver into the self‑
cleaning recharger and plug the
adaptor into a household outlet.
•Check that the charge status
lamp ( ) is glowing.
2. Press twice.
The DRY lamp glows, and the “Dry/Charge” mode will
start after approximately 6 seconds.
•It is possible to change to the “AUTO” mode even
after the “Dry/Charge” mode has started.
Dry
180 min
Charge
0 to 60 min
3. Remove the adaptor after the selected mode is completed.
5
Lubricate the shaver�
It will keep the movement of the
blade smooth and maintain a comfort
shave.
1. Apply one drop of oil to each of the
system outer foils.
2. Raise the trimmer and apply a drop of oil.
3. Switch the shaver on, and run it for approximately fi ve
seconds.
4. Switch off the shaver, and wipe off any excess oil from
the system outer foil with a soft cloth.
1
2
1
► Drying the shaver without the self-cleaning recharger
Dry in a shade and apply oil.
Notes
•Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
•Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or discoloration
of the parts.
Wipe with diluted soapy water.
•Do not use any kitchen or bathroom detergents other than
hand soap.
Doing so may cause malfunction.
•Do not use the self‑cleaning recharger while droplets or soap
remain on the shaver.
Doing so may change the concentration level or composition
of the cleaning liquid in the cleaning liquid unit, which may
degrade cleaning, sterilization, lubrication and drying
performance. This may also cause cleaning liquid to spill
from the self‑cleaning recharger.
ES-LV9Q_EU.indb 19 2017/12/22 9:13:18