Panasonic ES-LV53, Руководство по эксплуатации

Страница: 30 / 36

30
English
Problem Action
The shaving sensor
does not respond.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Depending on the beard thickness,
the shaving sensor may not react
and the driving sound may not
change. This is not abnormal.
Apply oil. The shaving sensor
may not respond when there is
not enough oil on the blades.
The shaving sensor
responds even though
the shaver is not in
contact with the skin.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water. (See page 27.)
Replace the system outer foil
and/or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Shaver stopped
functioning.
The appliance may not operate
in an ambient temperature lower
than approximately 5 °C.
The battery has reached the end
of its life.
Problem Action
The driving sound
changes while shaving.
While the shaving sensor lamp
glows, the shaving sensor is
operating. The sound changes
depending on the beard
thickness.
The power will not
switch to OFF.
Press the power switch twice
while using in the shaving sensor
mode.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service center authorised by
Panasonic for repair.
Battery life
The life of the battery is about 3 years. The battery in this
shaver is not intended to be replaced by consumers. Have the
battery replaced by an authorized service center.
Removing the built-in rechargeable battery
Remove the built-in rechargeable battery before disposing
of the shaver.
Please make sure that the battery is disposed of at an officially
designated location if there is one.
This figure must only be used when disposing of the shaver,
and must not be used to repair it. If you dismantle the shaver
yourself, it will no longer be waterproof, which may cause it to
malfunction.
Remove the shaver from the AC adaptor. Press the power
switch to turn on the power and then keep the power on until
未命名-2.indd 30 2017/7/11 14:32:51