Usage
22
Operating Instructions
Installing the elite
Panaboard software/book
You need to install the elite Panaboard software/book
on the computer that will be used with the elite
Panaboard.
To install the elite Panaboard software/book, follow the
procedure below.
Notice
•
Do not connect the USB cable until the
installation is completed.
•
Do not connect more than 1 elite Panaboard to
the same computer.
(Doing so can cause erroneous behavior on the
computer.)
1.
Turn on your computer and start the Windows
operating system.
•
Log into an account with Administrator
privileges.
2.
Insert the included DVD-ROM into the
DVD-ROM drive.
•
The setup screen will be displayed.
•
If the setup screen does not appear, select your
DVD-ROM drive in Explorer and double-click
[Menu.exe].
•
In Windows Vista or Windows 7, if the Autoplay
dialog box is displayed, click [Run Menu.exe].
3.
When the “Welcome” screen has been
displayed, click [Next].
4.
When the “Model Selections” screen is
displayed, click the type of device you are
using.
5.
When the “Menu” screen is displayed, click
[Read Me First].
•
After the system requirements are displayed,
make sure that your computer meets the
requirements.
6.
Click [Install elite Panaboard] on the “Menu”
screen.
7.
If you agree to the terms in the “License
Agreement”, click [Yes].
•
In Windows Vista, if the “User Account Control”
window is displayed, click [Continue] to continue
with the installation.
•
In Windows 7, if the “User Account Control”
window is displayed, click [Yes] to continue with
the installation.
UB-T880-PJQXC0337ZA_mst.book 22 ページ 2010年5月11日 火曜日 午後1時9分