Panasonic DP-MC210, Руководство по эксплуатации

Страница: 62 / 128

9. Programmable Features
62
Setting the waiting time for
the power save mode
{#}{
4
}{
0
}{
3
}
To set the length of time before the unit enters power save mode.
{
1
}
“
5min
” : 5 minutes
{
2
}
“
15min
” (default): 15 minutes
{
3
}
“
30min
” : 30 minutes
{
4
}
“
1h
” : 1 hour
Note:
L
When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Holding the previous contrast
setting
{#}{
4
}{
6
}{
2
}
{
0
}
“
Disabled
” (default): Deactivates this feature.
{
1
}
“
Enabled
” : The unit will hold the previous setting.
Note:
L
The previous setting will be held individually for copying and sending faxes.
Setting the default operation
mode
{#}{
4
}{
6
}{
3
}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{
1
}
“
Copy
” (default): Copy mode is selected as default.
{
2
}
“
Fax
” : Fax mode is selected as default.
Note:
L
You cannot select the scan mode or print mode using this feature.
Setting the default operation
mode timer
{#}{
4
}{
6
}{
4
}
To set the timer before returning to the default operation mode (feature #463).
{
0
}
“
Off
” : Deactivates this feature.
{
1
}
“
30s
” : 30 seconds
{
2
}
“
1min
” (default): 1 minute
{
3
}
“
2min
” : 2 minutes
{
4
}
“
5min
” : 5 minutes
Cleaning the drum
{#}{
4
}{
8
}{
0
}
Clean the drum cartridge automatically. See page 110 for details.
Setting toner save feature
{#}{
4
}{
8
}{
2
}
{
0
}
“
Off
” (default): Deactivates this feature.
{
1
}
“
On
” : The toner cartridge will last longer.
Note:
L
This feature may lower the print quality by reducing toner consumption.
Changing the color
calibration for all colors
(cyan, magenta, yellow and
black)
{#}{
4
}{
8
}{
5
}
Change the color calibration if color printing is too dark or too light. See page 80
for details.
Changing the color
calibration for cyan
{#}{
4
}{
8
}{
6
}
Change the color calibration if color printing is too dark or too light. See page 80
for details.
Changing the color
calibration for magenta
{#}{
4
}{
8
}{
7
}
Change the color calibration if color printing is too dark or too light. See page 80
for details.
Changing the color
calibration for yellow
{#}{
4
}{
8
}{
8
}
Change the color calibration if color printing is too dark or too light. See page 80
for details.
Changing the color
calibration for black
{#}{
4
}{
8
}{
9
}
Change the color calibration if color printing is too dark or too light. See page 80
for details.
Feature/Code Selection