Panasonic DP-MB251CX Скачать руководство пользователя страница 135

Страница: 135 / 152

You can clean the recording paper feed rollers (

)

with a cloth lightly moistened with water, and let all
parts dry thoroughly.

Close the front cover.

Turn the power switch ON.

16.4 Cleaning the pickup rollers

Clean the pickup rollers when documents fed from the
standard input tray frequently misfeed.

Caution:

Do not use paper products, such as paper towels
or tissues for cleaning.

Turn the power switch OFF.

Pull the standard input tray (

) until it clicks into

place, then pull it completely out, lifting the front part
of the tray.

Clean the pickup rollers (

) with a cloth lightly

moistened with water, and let all parts dry thoroughly.

Insert the standard input tray into the unit, lifting the
front part of the tray. Then push it completely into the
unit.

16.5 Cleaning the drum cartridge

Important:

If the groove of the drum cartridge is dirty, lines
or dirty patterns may appear on printed sheets.
Be sure to remove any toner remaining on the

135

16. Cleaning

Содержание DP-MB251CX

























































































































































Результаты поиска

Содержание DP-MB251CX

Отзывы:

Похожие инструкции для DP-MB251CX

Бренды по названию

Популярные бренды

Panasonic DP-MB251CX, Руководство по эксплуатации

Результаты поиска

Содержание DP-MB251CX

Отзывы:

Похожие инструкции для DP-MB251CX

Бренды по названию

Популярные бренды