Panasonic DP-180/190, Руководство по обслуживанию

Страница: 131 / 296

131
UF-9000
JAN 2004
Ver. 1.0
DP-180/190
722 RCV LAN Failed to obtain the Network
Parameters (such as: IP Address,
Subnet Mask, Default Gateway IP
Address, etc.) from the DHCP
server. LAN Cable is disconnected.
DHCP is not available.
(Contact the Network Administrator.)
725 XMT
POP LAN DNS Server connection timed out. Incorrect DNS Server address is set.
DNS Server is down.
726 XMT
POP LAN Received an error response from
the DNS Server. Incorrect POP Server address is set.
Incorrect SMTP Server address is set.
729 XMT LAN Failed to authenticate (SMTP
AUTHENTICATION) when
connecting with the SMTP server. SMTP AUTHENTICATION, User Name
and/or Password are incorrect.
(Contact the Network Administrator.)
730 RCV LAN Unable to program the Internet
parameters or the autodialer with
Email from a PC. Verify that the Fax Parameter #158 is
set to 2: Valid.
731 RCV LAN Dialer full while Relayed
Transmission Request was
received. Dial buffer for manual number dialing
(70 stations) are being used.
741 XMT, Polling Unable to dial Deleted the registered station name
before dialing with Timer Controlled
Communications, etc.
800 Relay
Comm.
The machine was requested to
relay a document but has no Relay
Hub capability.
814 Conf. XMT
Conf. Polling
Relay
Comm.
The remote station does not have
Relay XMT nor Confidential
Communication capability.
815 Conf. RCV Mailbox is full.
816 Conf. Polled "The received Polling Password
did not match. The machine does
not have Confidential Comm.
capability."
825 Conf. RCV
Conf. Polled
Parameter settings of the initial
sending station are not properly
set.
826 RCV B If applicable sub-address is not
registered in the phone book of the
receiver side when using sub-
addressing function.
Receiver side does not have correct
sub-address in their phone book.
870 MEM XMT
Multi-Copy
Memory overflow occurred while
storing documents into memory.
879 Memory
RCV
PSTN Memory overflow occurred during
substitute memory reception.
Memory overflow on the Fax side.
LAN Memory overflow.
Mail Server sent a reset command
while downloading the data to the
machine. Memory overflow on the Fax side.
Mail server aborted the download (Busy
with other higher priority jobs).
880 - - File Access Error.
884 - - File Access Error.
961 RCV LAN Memory file access error. SC PCB is defective.
Fax Information Codes
Code Mode Phase Description of Problem Cause