Panasonic DMP-MST60, Руководство по эксплуатации

Страница: 32 / 34

- 32 -
Reference
Specifications
* Using supplied AC adaptor
≥ Specifications are subject to change without notice.
≥
With certain recording states and folder structures, the play
order may differ or playback may not be possible.
General
Signal system PAL/NTSC
Operating
temperature range
i
5
o
C to
i
35
o
C
Operating humidity
range 10 % to 80 % RH
(no condensation)
HDMI AV output Output connector:
Type A (19 pin) 1 system
USB slot USB2.0
1 system
Ethernet 10BASE-T/100BASE-TX
1 system
Wireless LAN Standard Compliance:
IEEE802.11 n/g/b/a
Frequency range:
2.4 GHz/5 GHz band
Security:
WPA™/WPA2™
(Encryption Type: TKIP/AES,
Authentication Type: PSK),
WEP (64 bit/128 bit)
Power supply DC 12 V (DC IN terminal)
Power
consumption*
[MST60] Approx. 9 W
[MS10]
Approx. 7 W
Power consumption
in standby mode*
[MST60] Approx. 0.5 W
[MS10]
Approx. 0.4 W
Power consumption
in quick start
standby mode*
[MST60] Approx. 5 W
[MS10]
Approx. 3 W
AC Adaptor Power source:
100 V to 240 V, 50/60 Hz, 0.6 A
DC output: DC 12 V 2 A
Dimensions
(W
k
H
k
D)
126 mm
k
29 mm
k
126 mm
Mass
[MST60] Approx. 200
g
[MS10]
Approx. 190 g
File format
File format Extension Reference
MP3 “.MP3”, “.mp3”
This unit supports ID3
tags, but only titles, artist
names and album names
can be displayed.
JPEG “.JPG”, “.jpg”
≥
MOTION JPEG and
Progressive JPEG are
not supported.
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
MKV
“.MKV”, “.mkv”
≥
The video file and
subtitles text file are
inside the same folder,
and the file names are
the same except for the
file extensions.
≥ Some MKV/Xvid files
may not play back,
depending on the video
resolution and frame
rate condition.
Subtitles text
file
“.SRT”, “.srt”,
“.SSA”, “.ssa”,
“.ASS”, “.ass”
Xvid
“.AVI”, “.avi”
Subtitles text
file
“.SRT”, “.srt”,
“.SUB”, “.sub”,
“.TXT”, “.txt”
FLAC “.FLAC”, “.flac”
Maximum sampling rate:
192 kHz/24 bit
WAV “.WAV”, “.wav”
Maximum sampling rate:
192 kHz/24 bit
MPO “.MPO”, “.mpo”
3D still picture
AAC
“.M4A”, “.m4a”,
“.AAC”, “.aac”
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/320 kbps
WMA “.WMA”, “.wma”
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/355 kbps