Panasonic DMP-BDT235, Руководство по эксплуатации

Страница: 31 / 48

- 31 -
Settings
¾ Deep Colour Output
This setting is for selecting whether to use Deep
Colour output when a TV that supports Deep
Colour is connected.
¾ Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
∫ Dialogue Enhancer (
>
29)
∫
Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
∫
Digital Audio Output
Press [OK] to show the following settings:
¾ Dolby D/Dolby D +/Dolby TrueHD
¾ DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
≥ Not making the proper settings may result in
noise.
¾ BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
¾ HDMI Colour Mode
This setting is for selecting colour-space
conversion of the image signal.
¾ HDMI(SUB) Output Mode
[BDT335]
Set to output the video from the HDMI AV OUT
SUB terminal or not.
Sound
≥
“Automatic” is effective only when playing
Dolby TrueHD.
¾ HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
≥
Select “Off” when the TV is connected to this
unit via HDMI AV OUT terminal, and this unit
is also connected to other devices, such as
an amplifier/receiver via an OPTICAL
terminal.