30
VQT4V26
¾
24p Output
[BDT230]
[BDT225]
When this unit is connected to a TV supporting
1080/24p output, movies and other material
recorded at 24p*
1
are output at 24p.
≥
When playing DVD-Video, set to “On” and
then set “24p” in “Video Settings” (
>
28) to
“On”.
≥
When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
¾
HDMI Color Mode
This setting is for selecting color-space
conversion of the image signal.
¾
Deep Color Output
This setting is for selecting whether to use Deep
Color output when a TV that supports Deep
Color is connected.
¾
Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
¾
HDMI(SUB) Output Mode
[BDT330]
Set to output the video from the HDMI AV OUT
SUB terminal or not.
*1
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
*2
A high resolution image/display technology of
approximately 4000 (width)
k
2000 (height) pixels.
∫
Dialog Enhancer
(
>
28)
∫
Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥
“Auto” is effective only when playing Dolby
TrueHD.
∫
Digital Audio Output
Press [OK] to show the following settings:
¾
Dolby D/Dolby D +/Dolby TrueHD
¾
DTS/DTS-HD
Select the audio signal to output.
≥
Select “PCM”, when the connected equipment
cannot decode the respective audio format. This
unit decodes the audio format and transmits to the
connected equipment.
≥
Not making the proper settings may result in noise.
¾
BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click sound).
If “Off” is selected, the unit outputs the primary
audio only.
¾
HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
≥
Select “Off” when the TV is connected to this
unit via HDMI AV OUT terminal, and this unit
is also connected to other devices, such as
an amplifier/receiver via an OPTICAL
terminal.
Audio
DMP-BDT330_230_VQT4V26_eng.book 30 ページ ２０１３年８月６日 火曜日 午前１１時１６分
