HD-MOD DMP-BD60/80 NB
BluRayMods.com ©2008-2009 Page - 1 -
Panasonic DMP-BD60/80
Installation Manual
Please note that this modification to your player invalidates any warranty that
may already exist on your player.
Introduction
Installing this modification is difficult. It requires soldering on to some very small components on
the mainboard.
You will require a
Fine tip soldering iron (max 25 watt)
Solder flux etc.
Some lengths of thin wire
Philips screwdriver
Double sided tape.
General information
The installation of the ICOS HD Multi region chip is difficult. If you are not experienced with
soldering, please let us install the kit for you.
This modification is done entirely at your own risk. We do NOT accept any liability in the
event of damage to your BD-player in the process of installation of the chip or in the usage
of the modification.
If you have never used a soldering iron or are not competent with it, please do not attempt
to perform this modification.
We recommend you read this manual
completely
before installing this modification.
