Application (Record)
Using the [Rec] menu
SQW0206
- 142 -
●
Mosaic effect may appear depending on subject and recording conditions.
●
Cannot be set in the following cases:
•Scene Modes ([High Sens.], [3D Photo Mode])
•When [Quality] is set to [
]
•For the setting procedures of the menu.
[Quality]
■
Recording mode:
Set the picture quality.
■
Settings
[Fine]
Gives priority to picture quality and saves pictures in
JPEG file format.
[Standard]
Saves pictures in JPEG file format using standard
picture quality.
[RAW+Fine]
Saves pictures in JPEG file format in addition to the
RAW file format.
*
1
[RAW+Standard]
[RAW]
Saves pictures in the RAW file format.
*
2
[3D+Fine]
Simultaneously saves 3D still picture data (MPO) and
pictures in JPEG file format. (Only when [3D Photo
Mode] Scene Mode is set.)
[3D+Standard]
*
1
If you delete a RAW file from the camera, the corresponding JPEG file is also deleted.
*
2
You cannot set the picture size. (The pictures are saved using the maximum recordable pixels for
each image aspect ratio.)
■
About RAW file
In RAW file format the data is saved without any picture processing by the camera.
You can use Ichikawa Soft Laboratory’s “SILKYPIX Developer Studio SE” to save RAW
file format pictures in file formats (JPEG, TIFF, etc.) that can be displayed on a PC,
etc., and to perform advanced editing such as correcting the white balance of pictures
recorded previously. Note, however, that the volume of picture data in a RAW file is
larger.
Download “SILKYPIX Developer Studio SE” from website and install it on your
computer to use. For details on how to download the software, etc., refer to
.
●
[Quality] is fixed to [ ] ([Standard]) in [High Sens.] Scene Mode.
●
You cannot set to [ ], [ ], or [
] in the following cases:
•[Panorama Shot] Mode
•Scene Modes ([Handheld Night Shot], [HDR])
•When the [Burst] setting is set to [ ] or [ ]
