356
SQW0566
Connecting with other devices
Storing recorded still pictures and motion pictures on your PC
■
For PTP mode
The camera can be connected to your computer even if [USB Mode]
is set to
[PictBridge(PTP)].
•Data can be read only from the card in the PC.
•It may not be possible to import if there are 1,000 or more pictures on the card.
•Motion pictures cannot be played back in the PTP mode.
■
Copying to your computer without using “PHOTOfunSTUDIO”
You can save pictures to use on your computer by dragging and dropping folders and
files into separate folders on your computer.
•
The card of this unit contains the following files (folder structure).
*
2
●
Windows
Drive (“LUMIX”) is
displayed in [Computer].
●
Mac
Drive (“LUMIX”) is
displayed on the desktop.
DCIM
(Still/motion pictures)
100_PANA
(Up to 999 pictures/folder)
Folder number
P1000001.JPG
*
1
File number
P1000999.JPG
101_PANA
999_PANA
MISC
(DPOF files, Favourite)
PRIVATE
AVCHD
(Motion pictures in AVCHD)
TZ110/ZS110
Colour Space P: sRGB
_: AdobeRGB
Card
*
1
.JPG: Still pictures
.RW2: Still pictures recorded in RAW file
.MP4: [MP4] Motion Pictures
*
2
New folders are created in the following cases:
•When there is a picture with file number 999 inside the folder.
•When using cards already containing the same folder number (for example, pictures taken with
other cameras, etc.).
•When recording after performing [No.Reset].
(→85)
●
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
●
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional).
●
When the battery begins to run out during communication, a warning beep sounds. Remove the
USB connection cable safely. Otherwise, data may be destroyed.
●
Before connecting or disconnecting the AC adaptor (optional), turn the camera off.