
4. Camera
62
Recording Mode:
∫
Registering Personal Menu Settings (Registering custom settings)
Up to 2 sets of the current camera settings can be registered in [Cust.Set Mem.] to allow recording to be
performed with the same settings. (
/
)
Preparations:
Set in advance the Recording Mode you wish to save and select the desired menu settings on the unit.
1
From the Recording screen
>
[
]
>
[Custom]
>
[Cust.Set Mem.].
2
Tap [C1]/[C2].
≥
Confirmation screen is displayed. It is executed when [OK] is selected.
Exit the menu after it is executed.
∫
Recording using registered custom set
You can easily call up the settings you have registered using [Cust.Set Mem.].
Set the Recording Mode to [
]/[
≥
The custom set will be called up.
≥
Saving of the selected custom settings is displayed on the screen.
∫
Changing the settings
Registered content will not change even when the menu setting is changed temporarily with the Recording Mode
set to
or
.
To change the registered settings, overwrite the registered content using [Cust.Set Mem.] on the [Custom] menu.
Registering your preferred settings (Custom Mode)
You can register the current camera function settings as custom settings.
If you then record in Custom Mode, you can use the registered settings.
≥
Initial setting of the Programme AE Mode is registered as the custom settings initially.
≥
The following items are not registered as custom settings.
– [Auto Backup]/[No.Reset] ([Setup] menu)
– Camera Mode (outward facing camera/inward facing camera)
0500
0500
0500
A
A
C1
C1
C1