Panasonic DC-S5, Руководство пользователя

Страница: 426 / 570

15. Wi-Fi/Bluetooth
426
™
Using Password Authentication to Connect
You can enhance Wi-Fi connection security by using password
authentication through either QR code or manual input.
Scanning QR code to connect
1
Set [Wi-Fi Password] on the camera to [ON].
0 ¨ [ ] ¨ [ ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup] ¨ [Wi-Fi Password] ¨ [ON]
2 Display the QR code
A
.
0
¨ [ ] ¨ [ ] ¨ [Wi-Fi] ¨ [Wi-Fi
Function]
¨
[New Connection]
¨
[Remote
Shooting & View]
0 You can also perform the same operation
by pressing the Fn button assigned with
[Wi-Fi].
For information about the Fn button, refer
to page
321 .
0
Press or to enlarge the QR code.
3
On the smartphone, start up “LUMIX Sync”.
0 If a message is displayed indicating that the smartphone is searching for
cameras, close the message.
4
Select [ ].
5 Select [Wi-Fi connection].
6 Select [QR code].
7 Scan the QR code displayed on the screen of the camera using
“LUMIX Sync”.
0 (iOS devices) When a message to confirm the change of destination is
displayed, select [Join].