manualshive.com logo in svg

Panasonic DC-BS1H, Руководство по эксплуатации, Страница: 149 / 304

Поделиться
Скачать
Panasonic DC-BS1H Скачать руководство пользователя страница 149

- 149 -

- 149 -

8.  Connections with External Devices - Headphones

Headphones

You can record videos while monitoring their sound by connecting commercially available headphones to the camera.

A

A

 Headphone terminal

 

●

Do not use the Headphone cables with the length of 3 m (9.8 feet) or more.

 

●

Excessive sound pressure from earphones and headphones can cause hearing loss.

Switching the Sound Output Method

[MENU/SET]   [ ]   [ ]   Select [Sound Output]

[REALTIME]

Audio without time lag. It may differ from the sound recorded in videos.

[REC SOUND]

Audio to be recorded in videos. Output sound may be delayed from actual sound.

 

●

The setting is fixed to [REC SOUND] in the following cases:
–  When [Special Mic.] is set to [LENS AUTO], [SHOTGUN], [S.SHOTGUN], or [MANUAL]
–  When using an XLR Microphone Adaptor (DMW-XLR1: optional)

Adjusting the Headphone Volume

Connect the headphones and rotate  .

 : Reduces the volume.
 : Increases the volume.

 

■

To adjust the volume using the menu

  Select [Headphone Volume].

 

●

[MENU/SET]   [ ]   [ ]   [Headphone Volume]

 Press 

 to adjust the headphone volume and then press [MENU/SET].

 

●

It can be adjusted in a range of [0] to [LEVEL15].

Содержание DC-BS1H

















































































































































































































































































































Отзывы:

Нет отзывов