Panasonic DC-BGH1 Скачать руководство пользователя страница 55

Страница: 55 / 284

- 55 -

4. Recording Videos - Recording Settings For Video

Recording Settings For Video

This section describes the settings used when video recording.

[System Frequency]

This changes the system frequency of videos that are recorded and played back.

The default setting is for the system frequency to be set to the TV broadcast system for the region where the camera was

bought.

[MENU/SET] [ ] [ ] Select [System Frequency]

[59.94Hz (NTSC)]

System frequency for regions using the NTSC broadcasting system

[50.00Hz (PAL)]

System frequency for regions using the PAL broadcasting system

[24.00Hz (CINEMA)]

System frequency for producing cinema film

●

After changing the setting, turn the camera off and on.

●

If you record using a system frequency that differs from the broadcasting system of your region, it may not be possible

for you to properly playback videos on your TV.

●

A video recorded with a system frequency different from the setting of [System Frequency] cannot be played back in the

camera.

[Rec. File Format]

Sets the recording file format of videos to be recorded.

[MENU/SET] [ ] [ ] Select [Rec. File Format]

[MP4]

This file format is suitable for playback on PCs.

[MOV]

This file format is suitable for image editing.

●

When [System Frequency] is set to [24.00Hz (CINEMA)], it is fixed to [MOV].

Содержание DC-BGH1





























































































































































































































































































Результаты поиска

Содержание DC-BGH1

Отзывы:

Похожие инструкции для DC-BGH1

Бренды по названию

Популярные бренды

Panasonic DC-BGH1, Руководство по эксплуатации

Результаты поиска

Содержание DC-BGH1

Отзывы:

Похожие инструкции для DC-BGH1

Бренды по названию

Популярные бренды