background image

INDIVIDUAL CONTROL SYSTEMS

Timer remote controller (CZ-RTC2)

Basic remote controller ON/OFF
· Operation mode changeover (Cooling, Heating, Dry, Auto, Fan).
· Temperature setting (Cooling/Dry: 18-30 deg Heating: 16-30 deg).
· Fan speed setting H/ M/ L and Auto.
· Air flow direction adjustment.

Time Function 24 hours real time clock
· Day of the week indicator.

Weekly Programme Function
· A maximum of 6 actions can be programmed for each day.

Outing Function
·  This function can prevent the room temperature from dropping or rising 

when the occupants are out for a long time.

Sleeping Function
· This function controls the room temperature for comfortable sleeping.

Max. 8 indoor units can be controlled from one remote controller

Remote control by main remote controller and sub controller is 
possible
Max. 2 remote controllers (main remote controller and sub controller) can 
be installed for one indoor unit.

Possible to connect to the outdoor unit using PAW-MRC cable for 
servicing purposes

Dimensions
H 120 x W 120 x D 16 mm

Wireless remote controller

Easy installation for the 4-way cassette type simply by replacing the 
corner part

24 hour timer function

Remote control by main remote controller and sub controller is 
possible
·  Max. 2 remote controllers (main remote controller and sub controller) can 

be installed for one indoor unit.

When CZ-RWSC2 is used, wireless control becomes possible for all 
indoor units
·  When a separate receiver is set up in a different room, control from that 

room also becomes possible.

·  Automatic operation by means of the emergency operation button is possible 

even when the remote controller has been lost or the batteries have been 
exhausted.

Operation of separate energy recovery ventilators
When commercial ventilation fans or heat-exchange ventilation fans have 
been installed, they can be operated with this remote control (interlocked 
operation with the indoor unit or independent ventilation ON/OFF).

Y1 TYPE

CZ-RWSY2

U1 TYPE

CZ-RWSU2

WIRELESS REMOTE CONTROL 
FOR ALL INDOOR UNITS

CZ-RWSC2

L1 TYPE

CZ-RWSL2

K1 TYPE

CZ-RWSK2

D1 AND T1 TYPE

CZ-RWST2

132

Содержание CZ-RTC2





















Отзывы: