Basic Functions of theCZ-RTC2Remote Controller
1. Start/Stop Button:
Pushing this button starts and pushing again stops the unit.
2. Operation Lamp:
This lamp is turned on when the air conditioner is in operation. This lamp blinks
when an error occurs or a protective device has activated.
Operation lamp
Start / Stop Button
3. Mode select button:
Push this button to select an operation mode .Each time the Mode Select Button is
pressed it cycles through all the available modes. In this example the mode is set to
Auto. (If applicable to your system).
Auto Mode
:
Automatically sets the system to heating or cooling for single split
systems (Heat P ump models only).
Auto Mode Icon
Mode select Button
