ー
91
ー
Operating Instructions
Intelligent Controller
90
Settings for energy saving
Energy saving
5
Touch [Register].
z
The “Setting” dialogue closes.
z
To cancel the settings, touch [Cancel].
5
6
Set other indoor units.
z
Repeat steps
3 to 5.
7
Select “Y
es” for “I/D unit demand”.
7
8
Touch [Register].
z
To cancel the settings, touch [Cancel].
8
Demand settings on the indoor unit [I/D unit demand settings]
91
Settings for energy saving
Energy saving
The “I/D unit demand settings” screen
A:
[Select all]/[Clear all] buttons
[Select all]
Select all indoor units.
[Clear all]
Cancel selection of all indoor units.
B:
Set whether to enable indoor unit demand control across the whole system or not.
Note
y
If you select “Y
es”, make sure that you set
“No” for outdoor unit demand settings.
C:
Change list order
. The list order changes
each time you touch it.
Display
The display follows the order set in “I/D unit settings” (P
.141).
O/D unit
The display follows the address order of the outdoor unit systems.
Address
The display follows the address order set in “I/D unit settings” (P
.141).
D:
The indoor units with a check mark next to them will be the subject of the changes to the settings.
E:
The I/D unit demand setting is enabled for the selected indoor unit if you put a check mark here.
This is linked with the “I/D unit
demand V
alid” (“Setting” dialogue) (P
.89) setting.
F:
The “Setting” dialogue is displayed when you touch this.
A
C
F
B
D
E
Demand settings on the indoor unit [I/D unit demand settings]
TGR-318_ENG.indb 91
2017/04/06 10:43:31