ー
89
ー
Operating Instructions
Intelligent Controller
86
Settings for energy saving
Energy saving
6
Set other indoor units.
z
Repeat steps
3 to 5.
7
Touch [Register].
z
To cancel the settings, touch [Cancel].
7
Item
Explanation
Timer
The energy saving timer function is enabled for the selected indoor unit if you put a check mark here.
5
Touch [Register].
z
The “Setting” dialogue closes.
z
To cancel the settings, touch [Cancel].
5
The “Energy saving timer” screen
A:
[Select all]/[Clear all] buttons
[Select all]
Select all indoor units.
[Clear all]
Cancel selection of all indoor units.
B:
Change list order
. The list order changes
each time you touch it.
Display
The display follows the order set in “I/D unit settings” (P
.141).
O/D unit
The display follows the address order of the outdoor unit systems.
Address
The display follows the address order set in “I/D unit settings” (P
.141).
C:
The indoor units with a check mark next to them will be the subject of the changes to the settings.
D:
The energy saving timer setting is enabled for the selected indoor unit if you put a check mark here.
This is linked with the “T
imer”
(“Setting” dialogue) setting.
E:
The “Setting” dialogue is displayed when you touch this.
A
B
D
E
C
Restricting operating capacity according to the time slot [Ener
gy saving timer]/[Efficient operation setting]
Note
y
The settings for efficient operation (when using gas heat pump a
ir conditioners) are made in the same way as energy saving time
r.
87
Settings for energy saving
Energy saving
Reducing the noise of outdoor units
[Out unit silent setting]
Set a time for the outdoor unit to operate more quietly at night compared to the day
.
1
Touch [Energy saving] in “EnergySaving”.
1
2
Touch [Out unit silent setting].
z
The “Out unit silent setting” screen is displayed.
2
3
Put a check mark in the “Select” column (3-1), and touch [Set.] (3-2).
z
The “Setting” dialogue is displayed.
3-
1
3-
2
4
Change the settings.
Item
Explanation
Start time End time
Set the start and end times. Use
to set the time.
The setting ranges are as follows.
y
Hours: 00 to 23 (1
hour intervals)
y
Minutes: 00 to 59 (1
minute intervals)
Note
y
You can make the settings extend over dif
ferent dates. For example: 22:00 to 08:00
Out unit silent
The silent operating mode is enabled if you put a check mark here.
5
Touch [Register].
z
The “Setting” dialogue closes.
z
To cancel the settings, touch [Cancel].
5
6
Set other indoor units.
z
Repeat steps
3 to 5.
Continued on next page
TGR-318_ENG.indb 89
2017/04/06 10:43:29