ー
87
ー
Operating Instructions
Intelligent Controller
82
Settings for energy saving
Energy saving
The “Unattended auto shutof
f” screen
A:
[Select all]/[Clear all] buttons
[Select all]
Select all indoor units.
[Clear all]
Cancel selection of all indoor units.
B:
Change list order
. The list order changes
each time you touch it.
Display
The display follows the order set in “I/D unit settings” (P
.141).
O/D unit
The display follows the address order of the outdoor unit systems.
Address
The display follows the address order set in “I/D unit settings” (P
.141).
C:
The indoor units with a check mark next to them will be the subject of the changes to the settings.
D:
The unattended auto shutof
f is enabled for
the selected indoor unit if you put a check mark here.
This is linked with the “Auto
shutof
f” (“Setting” dialogue) (P
.81) setting.
E:
The “Setting” dialogue is displayed when you touch this.
A
B
D
E
C
Automatically stopping restarts [Unattended auto shutoff]
83
Settings for energy saving
Energy saving
Restricting the range of set temperatures
[Set
temperature range limit]
Restrict the range of temperatures that can be set by setting upper and lower limits on temperatures.
4
Change the settings.
Item
Explanation
High limit Low limit
Set the upper temperature and lower temperature for “Heat”, “Cool”, and “Auto”. Set the temperature with
and
.
The setting ranges are as follows.
y
In heating mode:
16 to 30
°C*
1
(1
°C intervals)
*1
The upper limit for gas heat pumps is 26
°C.
y
In cooling (drying) mode:
18 to 30
°C (1
°C intervals)
y
In automatic mode:
17 to 27
°C (1
°C intervals)
Note
y
The temperature range you can set depends on the model.
Temp range limit
The temperature range limit function is enabled for the selected indoor unit if you put a check mark here.
Continued on next page
1
Touch [Energy saving] in “EnergySaving”.
1
2
Touch [Set temperature range limit].
z
The “Set temp. range limit” screen is displayed.
2
3
Put a check mark in the “Select” column (3-1), and touch [Set.] (3-2).
z
The “Setting” dialogue is displayed.
3-
1
3-
2
TGR-318_ENG.indb 87
2017/04/06 10:43:26