Panasonic CZ-256ESMC3, Технические данные инструкция, Страница: 81 / 179

ー
79
ー
Operating Instructions Intelligent Controller
66
Check accumulated values Operation/Status
The “I/D unit acc.” screen
A:
Set the order of display
.
[Area]
Display indoor units by area.
[I/D unit]
Display indoor units in display order
.
B:
Set the displayed values.
The “Data type”
dialogue is displayed when you touch this. Select from “Adaptor value”, “Balance total”, or “W
eighFactrBlnceTtl”.
C:
Set the periods to be displayed.
The
“Calendar” dialogue is displayed when you touch this.
D:
Set the time slots to be displayed.
The
“Specify time” dialogue is displayed when you touch this.
E:
The accumulated values for indoor units are displayed in a list. You can scroll up or down by swiping or flicking the screen.
Item
Explanation
Name
The names of the indoor units are displayed.
Area
The area number that the indoor unit belongs to is displayed.
ON/High
Displays the accumulated operating hours when the thermostat is “ON” and the fan is set to “High”.
ON/Mid
Displays the accumulated operating hours when the thermostat is “ON” and the fan is set to “Mid.”.
ON/Low
Displays the accumulated operating hours when the thermostat is “ON” and the fan is set to “Low”.
Total T/S
ON
The total value of accumulated operating hours when the thermostat is “ON” and when “ON/High”, “ON/Mid”, and “ON/Low”.
OFF/High
Displays the accumulated hours when the thermostat is “OFF” and the fan is set to “High”. (When [T/S OFF details] is touched)
OFF/Mid
Displays the accumulated hours when the thermostat is “OFF” and the fan is set to “Mid.”. (When [T/S OFF details] is touched)
OFF/Low
Displays the accumulated hours when the thermostat is “OFF” and the fan is set to “Low”. (When [T/S OFF details] is touched)
Total T/S
OFF
Displays the accumulated hours when the thermostat is “OFF”.
Elec Htr ON
Displays the accumulated hours when the heater is “ON”. (When [T/S OFF details] is touched)
T/S ON +
T/S OFF
Displays all the accumulated operating hours.
F:
The “OFF/High ”, “OFF/Mid”, “OFF/Low”, and “Elec Htr ON” items are added to the display when you touch this.
Touch again to
return to the items displayed previously
.
A
C
D
B
F
E
5
Check accumulated values.
Checking the list of accumulated values on the indoor unit
(2)
Touch the time slot to accumulate (4-2).
z
The settings are registered and the “Specify time” dialogue closes.
z
Refer to “RglrHourRnge” in “Calendr sttgs for distr calc” (P
.148) for information about “Rglr hour1” to “Rglr hour8”.
4-
2
67
Check accumulated values Operation/Status
Checking the list of accumulated values on the out
door unit
The accumulated values for outdoor units (engine operating times, engine operation cycles, etc.) are displayed in a list.
(1) T
ouch
(3-1).
z
The “Calendar” dialogue is displayed showing the current date.
3-
1
(2) T
ouch the date (3-2).
z
Use
to select the month you want to check.
The
current month is displayed if you touch [ThsMth].
z
The settings are registered and the “Calendar” dialogue closes.
3-
2
4
Set the time slots to display
.
(1) T
ouch [T
ime] (4-1).
z
The “Specify time” dialogue is displayed.
z
If you set the “Adaptor value”, you cannot select the time slots to be displayed.
4-
1
Continued on next page
1
Touch [Accumulate/Distrib] in “Oper
./
Status”.
1
2
Touch [O/D unit acc.].
z
The “O/D unit acc.” screen is displayed.
2
3
Set the period to be displayed.
z
Set the start and end of the period to be displayed.
z
The time at the left is the start of the period and the time at the right is the end.
z
If you set the “Adaptor value”, you cannot select the period to be displayed.
TGR-318_ENG.indb 79 2017/04/06 10:43:18