ー
55
ー
Operating Instructions
Intelligent Controller
18
Preparations before changing settings
Preparation
Menu list
1
Select the top menu.
z
Touch one of the “EnergySaving”, “Oper
./Status”, or “Settings” tabs.
2
Select the submenu.
Oper
./Status
EnergySaving
Oper
./Status
(Check on the status of connected units)
Submenu
Screen menu
Overview
Page
I/D unit list
Check the operational status of the indoor units in a list.
24
I/D unit information
Check the details about the indoor units (number of operation cycles, etc.) in a list.
28
O/D unit information
Check the details about the outdoor units (outdoor temperatures, etc.) in a list.
32
Alarm list
You can view a list of units with current alarms, where you can check the unit, the alarm type, and the date of the alarm.
35
Schedule/results
You can see the schedules set up for the future and how they performed in the past in a list.
53
Calendar
You can allocate a single day’
s schedule to a calendar
.
49
Schedule setting
You can register the schedule for a single day
.
43
Update schedule
You can modify a schedule that you have registered (only from the day of the change up to 4 days later
, or a total of 5
days).
55
Alarm log
Check the log of alarms that have occurred in the system in a list.
58
Operation/Status change log
Check the log of operation/status changes of the indoor units in a list.
61
I/D unit acc.
Check the accumulated data for the indoor units in a list.
65
O/D unit acc.
Check the accumulated data for the outdoor units in a list.
67
Pulse acc.
Check the accumulated data for the pulse meters in a list.
69
Distribution data
Check the details about distribution calculations in a list.
72
EnergySaving
(Perform energy saving settings)
Submenu
Screen menu
Overview
Page
Set temp. auto return
Even if the temperature initially set is changed, the temperature automatically returns to the set one after a certain amount of time.
77
Unattended auto shutof
f
If the indoor unit automatically stops at the set time but then is started again, this setting automatically stops the unit again repeatedly at set intervals.
80
Set temperature range limit
Restrict the temperatures that can be set by setting upper and lower limits on temperatures.
83
Energy saving timer/Efficient
operation setting*
You can specify time slots when you want operation capacity reduced.
85
Out unit silent setting
Set a time for the outdoor unit to operate at a lower level at night compared to the day
.
87
I/D unit demand settings
You can automatically control indoor units to cut the maximum demand for electricity or maximum gas consumption.
89
O/D unit demand settings
You can automatically control outdoor units to cut the maximum demand for electricity or maximum gas consumption.
92
Demand/peak shaving settings/
Peak cut settings*
Limit the electricity or gas consumed by outdoor units during the set time slot.
94
O/D unit cyclic
At specified 10
minute intervals, the thermostats of outdoor units in control g
roups are
turned of
f and restored repeatedly in order
.
101
I/D unit cyclic
At specified intervals (3, 4, or 5
minutes), the thermostats of indoor units in control
groups are turned of
f and restored repeatedly in order
.
97
Register demand point
Register the contacts between the external equipments and the main unit (Contact
A,
Contact B, Contact C).
104
Bar chart
Quantities of energy usage (electricity
, gas), etc., are shown in bar charts.
109
Line graph
Temperature changes, etc., are shown in line graphs.
11
3
* When using gas heat pump air conditioners
19
Preparations before changing settings
Preparation
Menu list
Settings
Settings
(Perform other miscellaneous settings)
Submenu
Screen menu
Overview
Page
Calendr sttngs for distr calc
Set specified days, cut-of
f days, particular time slots (regular hour ranges) and days of
the week for calculating distributions.
148
I/D unit settings
Change settings on indoor units, such as indoor unit addresses, groups belonged to, etc.
141
O/D unit settings
Change settings on outdoor units (addresses, etc.).
145
Schedule group name settings
Edit the name of the schedule group.
151
Area group name settings
Edit the name of the area group.
153
Distribution group settings
Edit the name of the distribution group.
155
Pulse meter settings
Make allocations between pulse meters and distribution groups.
158
Distribution mode settings
Set the mode used for distributing when calculating charges.
160
Distribution Ratio settings
Set the units for calculating electricity and gas usage charges.
161
Event control
Perform linked control by setting input and output conditions for devices.
162
Network settings
Make settings to enable remote control over a network.
123
Email settings
Configure the outgoing mail server
.
168
W
eb user settings
Register users that will access the unit over a network.
125
Communication adapter setting
Register the communication adaptor connected to this unit.
170
Check configuration*
Modify the registered configuration when there have been change
s to the configuration
of the system.
200
Backup
Save data (settings, accumulation/distribution, logs) to USB memory devices.
130
Restore
Restore data that has been stored in the unit or saved to a USB memory device.
132
CSV Output
Export (output) the settings for this unit in CSV format.
134
CSV Input
Import (input) the settings for this unit in CSV format.
136
Auto-save CSV file
Saves the CSV files (distributions, logs) automatically generate
d in this unit.
138
Display/V
olume settings*
Adjust the brightness of the unit’
s screen and the sound of the buzzer
.
173
Intelligent Controller info
Register the contacts for servicing (telephone numbers) for this unit.
174
Software update*
Update the software for this unit.
175
Initialize*
Initialise the settings for this unit.
176
All data will be lost when you initialise. Do not initialise under any circumstances.
Language&T
imeZone sttngs
Set the language to be used when setting and operating this unit.
179
Date settings
Manually set the date and time.
178
Open license
The licences for the freeware is displayed.
—
Test run
Perform a test operation of the indoor unit after installing this unit.
181
A/C communication settings
Make settings such as the communications protocol between this unit and the air conditioning units.
184
Maintenance information
Register the units that will require maintenance.
186
* These settings are not available for setting or operation over the network.
Menus marked with
require you to enter the admin number (password) when you select them.
menus require entry of the level
1 or higher admin number
, while
requires the level
2 admin number
.
Refer to “Input of the admin number (password)” (P
.22) for details.
TGR-318_ENG.indb 55
2017/04/06 10:42:55