manualshive.com logo in svg

Panasonic CZ-256ESMC3, Технические данные инструкция, Страница: 41 / 179

Поделиться
Скачать
Panasonic CZ-256ESMC3 Скачать руководство пользователя страница 41

 

ー

39 

ー

Replacement of SD card, and operation procedure at time of failure

Various procedures

● Description of operation procedure

After inserting the media correctly in SD device 1 and SD device 2, follow the procedure described below, and 
execute by pressing the 

1

 “Database switch” or 

2

 “Copy SD card” button.

After pressing the button, execute the process according to the screen message.

1

  Database switch

 

Change the settings so that SD device 1 (with SD card inserted) is the master database, and SD device 2 is 
in replication database mode.

SD insertion (○: insert)

State of the database mode of the SD card after database switch process

SD device 1

SD device 2

SD card of device 1

SD card of device 2

○

○

Master database

Replication database

○

×

Master database

-

×

○

-

-

* Regardless of the SD card type (SLC/MLC), the database mode will be set according to the devices where they 

are inserted.

2

  SD card copy

 

The contents of the SD card inserted in SD device 1 will be completely copied to the SD card inserted in SD 
device 2. 
* The unit cannot be operated with just copying. Follow the procedure to change the database mode correctly 

using the “database switch” process.

3

  USB output (* not used in the SD card exchange process)

Back up (extract) only the master database of SD1 onto the USB memory device.
* Insert the USB memory device correctly in the front USB terminal. (The side USB port can not be used)
* You can not restore from this backup (extracted) database file. 
* Do not use this output function unless it is necessary.

TGR-318_ENG.indb   39

2017/04/06   10:42:47

Содержание CZ-256ESMC3




















































































































































































Отзывы:

Нет отзывов