manualshive.com logo in svg

Panasonic CZ-256ESMC3, Технические данные инструкция, Страница: 178 / 179

Поделиться
Скачать
Panasonic CZ-256ESMC3 Скачать руководство пользователя страница 178

 

ー

176 

ー

1. Select the top menu

 

y

Touch the “EnergySaving” “Oper./ 
Status” “Settings” tab.

2. Select the sub menu

EnergySaving (Settings related to energy saving)

Sub menu

Screen menu

Overview

Operating 

Instructions 

page

★

Set temp. auto return

Even if the temperature initially set is changed, the 
temperature automatically returns to the set one 
after a certain amount of time.

77 (84)

★

Unattended auto shutoff

If the indoor unit automatically stops at the set time 
but then is started again, this setting automatically 
stops the unit again repeatedly at set intervals.

80 (86)

★

Set temperature range limit

Restrict the temperatures that can be set by setting 
upper and lower limits on temperatures.

83 (87)

★

Energy saving timer/
Efficient operation setting

*

You can specify time slots when you want operation 
capacity reduced.

85 (88)

★

Out unit silent setting

Set a time for the outdoor unit to operate at a lower 
noise level at night compared to the day.

87 (89)

★

I/D unit demand settings

You can automatically control indoor units to cut the 
maximum demand for electricity or maximum gas 
consumption.

89 (90)

★

O/D unit demand settings

You can automatically control outdoor units to cut the 
maximum demand for electricity or maximum gas 
consumption.

92 (92)

★

Demand/peak shaving settings

*

Limit the electricity or gas consumed by outdoor 
units during the set time slot.

94 (93)

★

O/D unit cyclic

At 10 minute intervals, the thermostats of outdoor 
units in control groups are turned off and restored 
repeatedly in order.

101 (96)

★

I/D unit cyclic

At specified intervals (3, 4, or 5 minutes), the 
thermostats of indoor units in control groups are 
turned off and restored repeatedly in order.

97 (94)

★

Register demand point

Register contact points (A contact, B contact, C con

-

tact) between the demand controller and the main 
unit.

104 (98)

Bar chart

Quantities of energy usage (electricity, gas), etc. are 
shown in bar charts.

109 (100)

Line graph

Temperature changes, etc. are shown in line graphs. 113 (102)

* When using gas heat pump air conditioners
* The numbers in parentheses indicate page number of this Technical Data.

 Menu list showing the level of the admin number (password)

EnergySaving

Other miscellaneous settings

TGR-318_ENG.indb   176

2017/04/06   10:44:51

Содержание CZ-256ESMC3




















































































































































































Отзывы:

Нет отзывов