ー
118
ー
Operating Instructions
Intelligent Controller
144
Configuring the system
Setting
4
Touch [Register].
z
To cancel the settings, touch [Cancel].
4
5
Touch [Register].
z
To cancel the settings, touch [Cancel].
5
Note
y
Do not allocate P
AC and GHP
to the same area or distribution
groups when using time distribution.
Automatically setting central addresses
1
Put a check mark in the “Register” column.
z
Select the indoor units you want to manage.
1
2
Touch [CNTR adr
AutSet].
2
Note
y
The central address is shared with other centralised controllers (system controllers, etc.). Do not change unless necessary
.
y
After setting the central address in the “Edit unit settings” dialogue, and then enable [CNTR adr
AutSet], the central
addresses will be overwritten.
Basic settings on the indoor unit
145
Configuring the system
Setting
Basic settings on the outdoor unit
Display details about outdoor units (outdoor unit addresses, etc.). Settings such as the names can also be changed.
4
Put a check mark in the “Register” column.
z
Select the outdoor units you want to manage.
4
5
Touch [Register].
z
To cancel the settings, touch [Cancel].
5
1
Touch [System Settings] in “Settings”.
z
The “System settings” screen is displayed.
1
2
Touch [O/D unit settings].
z
The “O/D unit settings” screen is displayed.
2
3
Check the setting details (P
.146).
TGR-318_ENG.indb 118
2017/04/06 10:44:06