ー
112
ー
Operating Instructions
Intelligent Controller
132
Setting
Backing up/restoring data
Restoring data
You can restore data that has been backed up in the unit (saved) or to a USB memory device.
4
Select the restore location and restore setting.
z
The restore location can be either “InCo” or “USBmemory”.
z
The restore setting can be either “Application settings” or “Sys. Settngs”.
Restore location
Restore setting
5
Touch [Restore].
z
Restoring starts. When restoring is complete, the message “Restart” is displayed.
z
Restart the unit.
The data you restore becomes ef
fective
after restart.
5
Continued on next page
1
Open the storage door and connect a USB memory device to the USB terminal.
2
Touch [Backup/CSV Output] in “Settings”.
z
The “Backup/CSV Output” screen is displayed.
2
3
Touch [Restore].
z
The “Restore” screen is displayed.
3
133
Setting
Backing up/restoring data
6
Touch
when you w
ant to
disconnect the USB memory device.
z
Remove your USB memory device after the message “USB memory can now be safely removed” is displayed.
z
Close the storage door after removing the USB memory device.
Note
y
The items you can restore are as follows:
Restore main unit Set.
Restore schedule settings and group settings.
y
The time required for restoring depends on the volume of data.
y
The data restored is that which was backed up.
y
“InitCom...” may be displayed for a long time (up to 1
hour and 30
minutes) when restarting immediately after restoring backed up data. Under
no circumstances turn the unit of
f at this stage.
You may corrupt files in the unit and render it unable to start.
If you are unable to start the unit,
the data in the unit will need to be repaired, so contact the place of purchase or your servicing agent to ask them to restore
the data.
Restoring data
TGR-318_ENG.indb 112
2017/04/06 10:43:58