manualshive.com logo in svg

Panasonic CZ-256ESMC3, Технические данные инструкция, Страница: 112 / 179

Поделиться
Скачать
Panasonic CZ-256ESMC3 Скачать руководство пользователя страница 112

 ー

110 

ー

Operating Instructions

Intelligent Controller

128

Perform remote operation of the unit over a network

Setting

Control remotely

You can remotely control this unit from the browser on a PC or similar device. The example here uses a PC to explain.

1

Start the browser

.

2

Enter the IP

 address.

 

z

Enter the “IP

 address” set in network settings.

 

z

The login screen is displayed.

3

Enter the “User ID” and “Password”.

 

z

Enter the personal user ID and password set in user  settings (P

.125).

 

z

The operation screen is displayed.

 

z

The operations are the same as the operations on this unit.

129

Setting

Backing up/restoring data

Backing up/restoring data

This chapter explains how to back up and restore data.

This unit has functionality to save the setting data, accumulated/distribution data, and log data to a USB memory  device. (Back up function) It also has the functionality to reload the saved data back into the unit. (Restore function) By regularly saving data to USB memory devices, you can restore the data in the main unit if it is ever corrupted  by power outages caused by lightning strikes, etc.

Screen menu

Overview

Page

Backup

Save data (settings, accumulation/distribution, logs) to USB memory devices.

130

Restore

Restore data that has been stored in the unit or saved to a USB memory device.

132

CSV Output

Export (output) the settings for this unit as a CSV file.

134

CSV Input

Import (input) the settings for this unit from a CSV file.

136

Auto-save CSV file

Saves the CSV files (distributions, logs) automatically generate

d in this unit.

138

TGR-318_ENG.indb   110

2017/04/06   10:43:56

Содержание CZ-256ESMC3




















































































































































































Отзывы:

Нет отзывов