ー
104
ー
Operating Instructions
Intelligent Controller
11
6
Displaying data in graphs
Energy saving
Setting items freely
When you select [UserSlct], you can display graphs where you can freely select the units and items. For example, the following combinations are possible.
y
The monthly transitions of total operating hours, thermostat ON operating times, and electricity usage for indoor unit
01 is displayed in a bar chart.
y
The daily transitions of set temperatures and indoor temperatures for indoor units
03 and 06 are
displayed in a line graph.
1
Touch [Energy saving mgmt] in “EnergySaving”.
1
2
Select the type of graph.
z
The main screen is displayed.
2
3
Touch [GrphDspSetgs].
z
The display settings screen is displayed.
3
4
Set the display range.
z
For details, refer to step
4 in “Graphing operating
times and
energy usage” (P
.109) for bar charts, or step
4 in “Graphing
temperature changes” (P
.1
13) for line graphs.
5
Touch [DispItem set].
z
The “DispItem set” screen is displayed.
5
6
Select [UserSlct].
6
Continued on next page
Making the settings
11
7
Displaying data in graphs
Energy saving
7
Select the unit.
7
8
Select the type of graph.
z
This setting can be selected only for “Bar chart”.
z
Refer to P
.106 for information about types of graphs.
9
Set the display units for the
Y axis.
(1)
Touch [Ax1] or [Ax2].
z
The “Unit setting” dialogue is displayed.
9-
1
(2)
Select the unit of display
.
z
The settings are registered and the “Unit setting” dialogue closes.
9-
2
10
Touch [AxsSet] to select the axis to display
.
z
Select the axis to display the data item.
z
The axis switches between “Ax1” and “Ax2” each time you touch it.
10
11
Select the item.
z
Refer to P
.107 for the items you can set.
z
You can select one item only
.
z
If you have selected [Unit] as the display method, the items
are fixed so there is no need for you to set them.
11
12
Select the device name.
12
Continued on next page
Setting items freely
TGR-318_ENG.indb 104
2017/04/06 10:43:49