ー
101
ー
Operating Instructions
Intelligent Controller
11
0
Displaying data in graphs
Energy saving
5
Touch [DispItem set].
z
The “DispItem set” screen is displayed.
5
6
Select how to display
.
z
Refer to P
.106 for information about how to display
.
6
(The following explains using examples as if “UntCmpar” was selected)
7
Select the unit.
z
Refer to P
.106 for information about units.
7
8
Select the type of graph.
z
Refer to P
.106 for information about types of graphs.
z
If you have selected [Rankng] as the display method, select either “W
orst” or “Best”.
8
9
Set the display units for the
Y axis.
(1) T
ouch [Ax1].
z
The “Unit setting” dialogue is displayed.
z
Select the display units for the
Y axis.
9-
1
(2)
Touch the unit to display
.
z
The settings are registered and the “Unit setting” dialogue closes.
9-
2
Continued on next page
Graphing operating times and energy usage
111
Displaying data in graphs
Energy saving
10
Select the item.
z
Refer to P
.107 for the items you can set.
z
You can select one item only
.
10
11
Select the device name.
z
Put a check mark in the “Sel.” column.
z
If you have selected “Rankng” as the display method and “SepUnt” as the graph type, all devices are the target, so you do not have to select.
11
Note
y
The number of units you can select depends on the settings for display method and graph type.
Display method
Graph type
Plel
Cumultve
UntCmpar
Up to 4
Up to 4
ChngPrDy
1 only
1 only
12
Set the goal values for the axis.
z
Touch [Ax1TgtV
al] and enter the numbers with the
touchscreen numeric keypad.
z
A red line is inserted to indicate the goal values for the graph.
z
You can set any goal.
z
This cannot be set if you have selected “Rankng” as the display method.
12
13
Touch [GraphDsp].
z
The graph is displayed in the main screen.
z
To cancel the settings, touch [Cancel].
13
Graphing operating times and energy usage
TGR-318_ENG.indb 101
2017/04/06 10:43:44