19
Standby/Hibernation Functions
z
From the shutdown screen
• Standby
In [start] - [Turn Off Computer], select [Stand By].
• Hibernation
In [start] - [Turn Off Computer], press and hold
Shift
, then select [Hibernate].
NOTE
z
If a disc formatted with B’s CLiP is inserted into the DVD-ROM & CD-R/RW drive
(while
is displayed on the taskbar), the computer will not enter standby or
hibernation mode. Eject the disc in advance.
Setting for Using the Hibernation Mode
At the time of purchase, the computer is set so that hibernation mode can be used.
1
Select [start] - [Control Panel] - [Performance and Maintenance] -
[Power Options].
2
In [Hibernate], add the check mark for [Enable hibernation] and select
[OK].
Precautions
Before entering the standby or hibernation mode
z
Be sure to save all data.
z
When a file in an external device such as a CD drive, external hard disk, or ATA card is
opened, close the file.
z
Even when a password has been set in the Setup Utility, [Enter Password] does not
appear when the computer resumes from the standby or hibernation mode. If you want to
use the security function when using the standby or hibernation mode, use the Windows
password as follows:
A
Select the account to change in [start] - [Control Panel] - [User Accounts].
B
Set the password.
