Useful Information
19
To clean the inside of the dust cover
Clean the inside of the dust cover once a month.
Turn off the computer, and disconnect the AC adaptor.
Close the display, and turn the computer over.
Remove the battery pack.
Remove the screw (B), and remove the dust cover (C) in
the direction of the arrow.
Clean the inside of the dust cover.
After cleaning, reset the dust cover (C), and secure the
screw (B).
C
B
CAUTION
●
If dust is piled up inside the dust cover and hard to remove, use an electric cleaner.
Be careful not to inhale dust.
●
Make sure no water or other liquid spills inside the dust cover, and pay attention not to drop
the screw inside the dust cover.
Dispose of Computer
■
Preparation
●
Remove all peripherals and SD memory card, etc.
●
Erase the stored data. (
è
Reference Manual
“Hard Disk Data Erase Utility”)
<Only for model with Built-in Bridge Battery>
<For Europe and U.S.A./Canada>
Attention Customers
Don’t remove the battery by yourself. The battery must be removed by qualified professionals.
When disposing of this product, be sure to contact qualified professionals to remove the battery.
Attention Qualified professionals to remove the battery
Dispose of this product correctly in accordance with the local regulations after removing the
battery as shown in the following procedure.
CAUTION
●
Never disassemble the computer except before disposal.
●
Refer to the precautions when disposing of the computer
(
è
OPERATING INSTRUCTIONS - Read Me First).
