Panasonic CF-20 series Скачать руководство пользователя страница 9

Страница: 9 / 179

Flash Memory Backup/Restore Function

Panasonic Corporation will bear no responsibility for any damage suffered (including loss of data) as a result of the use of this function.

Creating a Backup of the Flash Memory Data

You can create a backup of the flash memory data, which can be used to recover from hardware failure.

This function creates a backup of the recent state of the flash memory. To return the factory default, use a recovery disc. (

Create a Recovery Disc

)

To create a backup of the flash memory to another storage media (e.g., external hard disk).
Connect the storage media, and follow the steps below.

Open the Control Panel, and then click [System and Security] - [File History].
To open the Control Panel, proceed as follows.

Click

(Start) - [Windows System] - [Control Panel].

Click [System Image Backup].
Follow the on-screen instructions.

N O T E

Connect the AC adaptor and do not remove it until backup is complete.

Restoring the Flash Memory Data

Connect the storage media that created the backup.

Click

(Start) -

(Settings) - [Update & Security] - [Recovery].

Alternatively, click

(Settings) - [Update & Security] - [Recovery] in the tablet mode.

Click [Restart now] under “Advanced startup”

Click [Troubleshoot] - [Advanced options].

Click [System Image Recovery].

Follow the on-screen instructions.

*1 : Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example,
[Advanced start-up] may be displayed instead of [Advanced startup] in some language preference.)

Содержание CF-20 series




















































































































































































Результаты поиска

Содержание CF-20 series

Отзывы:

Похожие инструкции для CF-20 series

Бренды по названию

Популярные бренды

Panasonic CF-20 series, Инструкция по эксплуатации и справочное руководство

Результаты поиска

Содержание CF-20 series

Отзывы:

Похожие инструкции для CF-20 series

Бренды по названию

Популярные бренды