2 9
1
Connect the external display to your computer
Do not shut down using the suspend or hibernation mode.
Power off your computer
(
"Starting Up/Shutting Down")
Turn on the external display, then turn on your computer
3
External Display Port
External Display
You can select either an external display, LCD or simultaneous with
Fn
+
F3
.
In addition, you can set the display to use during start-up with the follow-
ing procedure.
For more detailed information, please refer to the operation manual
of the external display.
2
N O T E
1
Run the Setup Utility.
(
page 37
)
2
Using
and
, select [Main].
3
Using and , select [Display] and press
Enter
.
4
Using and
, select the display to use and press
Enter
.
5
Press
F10
, then select [Yes].
6
Select your external display.
Set your external display for [Monitor] in [Start] - [Settings] - [Con-
trol Panel] - [Display] - [Settings] - [Advanced Properties].
When a monitor that does not conform to the Plug & Play stan-
dards is connected, select [Change] and make the monitor set-
tings.
