Panasonic C266, Руководство по эксплуатации

Страница: 44 / 52

44
Chapter 2
SD Print Settings
Recalling a Preset Job Stored in Memory
You can recall the registered print settings by selecting preset job buttons.
z Refer to Storing a Job in Memory (see page 42).
1
Press the Print key if the machine is
set to other function mode.
2
Select “ SD Print ”.
3
Insert the SD Memory Card or connect
the USB Flash Memory.
z For details on how to insert the SD Memory
Card, refer to step 2 of Printing from SD
Memory Card (see page 11).
z For details on how to connect the USB Flash
Memory, refer to step 3 of Printing from
USB Flash Memory (see page 14).
4
Select the desired data.
5
Select “ Preset Jobs ”.
6
Select the desired preset job.
z Job buttons without names, indicate that
jobs have not been registered.
z If the Confirmation screen is displayed,
select “
Close ”.
7
To confirm the job settings, select
“
Confirm Settings ”, and then select
“ Close ”.
z To change the setting, refer to Confirming/
Editing the Selected Print Features (see
page 45).
8
Press the Start key.
z After finishing printing, press the Reset key to
return to the initial screen of the currently active
mode.