10
Chapter 1
Print Operations
Basic Operation Procedure
This section describes the workflow of printing data using the Control Panel of the machine. For the
detailed description of procedures for each print function, refer to the relevant suggested section.
1
Press the
key if the machine is
set to other function mode.
2
Select the desired print function.
•
SD Print:
Select when printing data in the SD Memory
Card, USB Flash Memory or Internal Hard
Disk Drive (see pages 11 to 16).
•
Mailbox:
Select when printing or deleting data saved
in Mailbox (see pages 17 to 21).
•
Job Control:
Select when turning the printer on-line or off-
line, canceling the current print job, or
managing print data in the Output Queue
(see pages 22 to 24).
z
You can confirm the progress information
while printing in the message area of the
Touch Panel Display by setting the Function
Parameter “
27 PC Print Page Display
”
(Printer Settings > General User Mode) to
“
On
”.
For more details, refer to
Printer Settings
in
the Operating Instructions (For Function
Parameters) of provided CD-ROM.
z
After finishing printing, press the
Reset
key to
return to the initial screen of the currently active
mode.
Содержание C266
Страница 25: ...25 Chapter 1 Print Operations Memo ...
Страница 51: ...51 Chapter 4 Appendix Memo ...
