Panasonic BL-WV10, Руководство по эксплуатации

Страница: 52 / 164

3 Viewing Camera Images
52
• The sensor range may differ depending on the camera type. See the
camera user guide for cautions in placing the camera to maximize that
range.
Sensor Notification Screen
If a camera sensor detects motion when Sensor Alert mode is on, the Monitoring
Screen can switch to the relevant camera, and that camera lens moves to the
sensor position. The sensor position is set as indicated on page 42.
Note
• If [Change Display] is set to [-] (off) on the [Sensor Alert] screen, the
display will not change to show the triggered camera.
• After the Sensor Notification Screen is displayed, the camera is set to
repeat sensor responses every several seconds, and those responses will
not be displayed. The sensor must go for roughly 5 seconds without
activation. If another camera’s sensor is triggered, however, the display
will switch to that camera.
• If a camera's sensor triggers Sensor Alert mode, the camera's image will
not be displayed if:
- The TV's video input is not set to the input which the BL-WV10 is
connected to
- You are currently recording a camera image (using standard
recording)
- You are accessing the [Sensor Alert] or [Setup] screen.
- You are taking a snapshot
- You have set the timer record or sensor record feature.
In these situations, you will still be alerted to sensor detection by the flashing of the
sensor indicator and by the alarm, if you have the alarm turned on.
• When viewing the television, you cannot switch to a sensor-activated
screen. Press
INPUT SELECT on the remote control to switch to the
camera Monitoring Screen.
• The alarm volume can be adjusted (see page 81).
BL-WV10_OI.book Page 52 Thursday, January 26, 2006 8:03 PM