Panasonic AW-UE50WP, Руководство по эксплуатации, Страница: 91 / 154

„ z
H.264
Set H.264 image settings.
The setting is confirmed with the [Set] button.
<NOTE>
• On browsers other than Internet Explorer 11, only JPEG images can
be displayed.
• H.264 cannot be set when the [Streaming mode] is [H.265],
[SRT(H.265)] or [NDI|HX V2].
• When starting RTSP/RTP transmissions, set the following URLs for
the decoders and applications.
- For H.264(1):
rtsp://[unit’s IP address]/MediaInput/h264/stream_1
- For H.264(2):
rtsp://[unit’s IP address]/MediaInput/h264/stream_2
- For H.264(3):
rtsp://[unit’s IP address]/MediaInput/h264/stream_3
- For H.264(4):
rtsp://[unit’s IP address]/MediaInput/h264/stream_4
[/MediaInput/h264/stream_
*
] can be changed in [RTSP] of
[Advanced]. (→ page 116)
H.264 transmission [On, Off]
Whether to transmit the H.264 images is set here.
Factory settings: On
Internet mode(Over HTTP)
[On, Off]
This setting is selected when transmitting H.264 images over the
Internet.
H.264 images can be transmitted using the same broadband router
settings as when transmitting JPEG images.
On The H.264 images and audio are transmitted using the
HTTP port. For details on setting the HTTP port number,
refer to page 112.
Off The H.264 images and audio are transmitted using the
UDP port.
Factory settings: Off
<NOTE>
• When [On] is set, only [Unicast port(AUTO)] can be selected as the
[Transmission type] setting.
• When [On] is set, it takes a few seconds before the H.264 images
are displayed.
• When this is set to [On], access will be limited to IPv4.
• This function is only reflected in the H.264 images displayed in the
live screen [Live].
Profile type [High, Main, Baseline]
Set the profile for when H.264 images are transmitted.
Factory settings: High
Image capture size [1920×1080, 1280×720, 640×360,
320×180]
Select the resolution for H.264 images.
Selectable options will vary depending on the selected resolution
setting.
H.264(1) 1920×1080, 1280×720
H.264(2) 1920×1080, 1280×720, 640×360, 320×180
H.264(3) 1280×720, 640×360, 320×180
H.264(4) 1280×720, 640×360, 320×180
Factory settings:
H.264(1): 1920×1080
H.264(2): 1280×720
H.264(3): 640×360
H.264(4): 640×360
Transmission priority [Constant bit rate, Frame rate, Best
effort]
Set the transmission mode for H.264 images.
Constant
bit rate
Transmits H.264 images at the bit rate specified in [Max bit
rate(per client)].
• The “Frame rate” value is automatically determined (as
5fps to 30fps or 5fps to 25fps) according to the selected
bit rate. (→ page 92)
Frame rate Transmit H.264 images at the frame rate specified in
[Frame rate].
• Set the frame rate and bit rate and transmit.
(→ page 92, page 92)
Best effort Transmit H.264 images at a variable bit rate between
the maximum and minimum specified in [Max bit rate(per
client)], according to the network bandwidth.
• Depending on how the bit rate is changed, the “Frame
rate” value is automatically determined (as 5fps to 30fps
or 5fps to 25fps). (→ page 92)
Factory settings: Frame rate
<NOTE>
• This cannot be set when the frame frequency is 24/23.98Hz.
90 91
Web screen configurations (continued)