Panasonic AW-UE50WP Скачать руководство пользователя страница 84

Страница: 84 / 154

Wireless Control

Wireless Control [Enable, Disable]

[Enable] or [Disable] is set here for operations conducted from the

wireless remote control.

The setting is confirmed with the [Set] button.

Factory settings:

Enable

<NOTE>

• When the power is turned on with the wireless remote control, then

operations from the wireless remote control are possible irrespective

of this setting value.

• This item is not reflected immediately when the setting is changed.

It is reflected when the unit is set to Standby mode, and then the

power is turned ON with any external device other than the wireless

remote control.

• This setting is not reflected when the power is turned ON with this

item set to [Enable]. It is reflected when the unit is set to Standby

mode, and then the power is turned ON with any external device

other than the wireless remote control.

Wireless ID [CAM1

CAM2

CAM3

CAM4]

Set the remote control ID for this unit.

The settings for this item correspond to the CAMERA <1> to <4>

buttons on the wireless remote control.

Factory settings:

CAM1

USB

USB Auto Active [Off, On]

When [USB Auto Active] is set to [On], if a USB cable is detected

in the Power On state while power is being supplied, [USB Mode]

automatically switches to [On].

Factory settings:

USB Auto Standby [Off, On]

Sets Off/On the function for facing the camera to the rear when USB

transmission finishes.

When [USB Auto Standby] is [On], the camera automatically goes to

Standby mode and faces towards the rear.

When [USB Auto Standby] is [On], [Privacy Mode] is [On] and [Power

On Position] behaves like [Standby].

Factory settings:

Off

<NOTE>

• Transmission can be started when the camera is recognized as

a USB device even in the Standby mode only when [USB Auto

Standby] is [On].

Output

Web screen configurations (continued)

Содержание AW-UE50WP



























































































































































Результаты поиска

Содержание AW-UE50WP

Отзывы:

Panasonic AW-UE50WP, Руководство по эксплуатации, Страница: 84 / 154

Результаты поиска

Содержание AW-UE50WP

Отзывы: