manualshive.com logo in svg

Panasonic AW-UE50WP, Руководство по эксплуатации, Страница: 26 / 154

Поделиться
Скачать
Panasonic AW-UE50WP Скачать руководство пользователя страница 26

Setting the remote control IDs

The wireless remote control (optional accessory) is capable of operating 

up to four units.

IDs are used to set which units are selected when the CAMERA <1>, 

<2>, <3> and <4> buttons on the wireless remote control have been 

pressed.

• When operating a multiple number of these units using wireless 

remote controls, set a different remote control ID for each control.

• When using one unit, set the remote control ID to “CAM1” unless the 

setting needs to be changed.

„

„

Setting procedure

Set “CAM1” to “CAM4” in [Wireless ID] on the [System] screen from the 

OSD menu of this unit.

    System 

 Frequency                 59.94Hz

 Format                1080/59.94p 

 Wireless Control           Enable

 Wireless ID                  CAM1

 USB

  USB Mode                     Off

  USB Auto Active               On

  USB Auto Standby             Off

 Return

Wireless ID [CAM1, CAM2, CAM3, CAM4]

Set the remote control ID (CAM1 to CAM4).

The “CAM1” to “CAM4” in this setting correspond to the CAMERA <1> to 

<4> buttons on the wireless remote control.

(The factory setting is “CAM1”.)

SET

MODE ON

ー

OPT

ー

OFF

OFF

LOW

HI

AUTO

MENU

CAMERA

GAIN

1

2

3

4

1

4

7

10

11

12

8

9

5

6

2

3

PRESET MEMORY

PRESET

LIMIT

HOME

CAMERA <1> to <4> buttons

„

„

Setting the installation method (“Desktop” or 

“Hanging”) from the OSD menu

Set “Desktop” or “Hanging” in [Install Position] on the [Pan/Tilt] screen 

from the OSD menu of this unit.

    Pan/Tilt 

 Install Position          Desktop

 P/T Speed Mode    Normal(60deg/s)

 Speed With Zoom Position       On

 Focus Adjust With PTZ.        Off

 Privacy Mode                  Off

 Power On Position         Standby

  Preset Number                001

 Return

Install Position [Desktop, Hanging]

[Desktop] or [Hanging] is selected here as the method used to install 

the unit.

Desktop Stand-alone installation
Hanging Suspended installation

<NOTE>

• When [Hanging] has been selected, the top, bottom, left and right 

of the images will be reversed, and up/down/left/right control for 

panning and tilting will also be reversed.

26

Содержание AW-UE50WP



























































































































































Отзывы:

Нет отзывов