Panasonic AW-UE50WP Скачать руководство пользователя страница 136

Страница: 136 / 154

Camera controls [Camera Control]

Zoom [Zoom]

Zooming in and zooming out are possible.

Setting ranges:

100 (at the wide limit) to 2400 (at the optical

telephoto limit)

Focusing [Focus]

The focus of the lens can be manually adjusted.

Setting ranges:

1 (Near) to 2731 (Far)

• This cannot be controlled when the focus mode is [Auto].

• If this item is set to automatic mode, the Focus mode is set to

[Auto]. Also, if the automatic mode is canceled, the Focus mode is

set to [Manual].

Exposure [Exposure]

Shutter speed settings can be made using the same procedure as

when [Step] is selected for the [Shutter Mode] item with the camera

menus or the web settings.

Setting values:

When the Frequency setting

is 59.94 Hz

When the Frequency setting

is 50 Hz

–13

1/10000

–12

1/4000

–11

1/2000

–10

1/1000

–9

1/500

–8

1/250

–7

1/100

1/120

–6

Off

• When set to the automatic mode, the lens iris is set to automatic

adjustment and the [Shutter Mode] in the camera menus and web

settings is set to [ELC].

When the automatic mode is canceled, the lens iris is set to manual

adjustment and the [Shutter Mode] in the camera menus and web

settings is set to [Step].

• If the shooting mode (Scene) is set to [Full Auto], changes to this

setting are not reflected on the unit.

Aperture/Iris [Aperture (Iris)]

The iris of the lens can be manually adjusted.

Setting ranges:

1 (minimum) to 2731 (open)

• This cannot be controlled when the lens iris is automatically

adjusted.

• Depending on the communication software you are using, the

setting values may be 10 times those above.

• If the shooting mode (Scene) is set to [Full Auto], changes to this

setting are not reflected on the unit.

Pan [Pan]

You can move the camera left and right.

Setting ranges:

–175 to +175 (1° increments)

• The speed of movement can be changed in [Preset Speed Table]/

[Preset Speed] in the camera menus and web settings.

<NOTE>

• Do not change the [Install Position] after connection with USB.

Operations will be reversed if you do so.

• Depending on the communication software, it may be possible to

set to a default value (Default), however it may not be possible to

control the pan of this unit.

Tilt [Tilt]

You can move the camera up and down.

Setting ranges:

– 30 to +90 (1° increments)

• The speed of movement can be changed in [Preset Speed Table]/

[Preset Speed] in the camera menus and web settings.

<NOTE>

• Do not change the [Install Position] after connection with USB.

Operations will be reversed if you do so.

Roll [Roll]

Not supported on this unit.

Low light compensation [Low Light Compensation]

Not supported on this unit.

Audio input mixer [Audio Input Mixer Properties]

Enable/Disable (mute) [Enable]

The audio input signal from a device connected to the AUDIO IN

connector can be switched Off/On using the same procedure as

[Audio] in the camera menus and web settings.

Setting values:

0 (Off), 1 (On)

Volume

Microphone input/line input and volume settings can be made using

the same procedure as [Input Volume] in the camera menus and web

settings.

Setting ranges:

– 40 to 0 (0.5dB increments)

<NOTE>

• Depending on the communication software you are using, you

may be able to adjust the volume automatically. Depending on the

combination of this unit and the communication software, the audio

may be unstable.

• The images and audio may not be stable, depending on the

performance characteristics of the personal computer, etc., you

are using. If this occurs, make the resolution and frame rate of the

images smaller or change the audio input to being from equipment

such as a personal computer rather than from this unit.

136

Web camera function (continued)

Содержание AW-UE50WP



























































































































































Результаты поиска

Содержание AW-UE50WP

Отзывы:

Panasonic AW-UE50WP, Руководство по эксплуатации, Страница: 136 / 154

Результаты поиска

Содержание AW-UE50WP

Отзывы: