Panasonic AW-UE50WP, Руководство по эксплуатации, Страница: 115 / 154

„ z
UPnP
This unit supports UPnP (Universal Plug and Play). Using the UPnP
function allows the following to be set automatically.
• Sets the router’s port forwarding function. (However, a UPnP-
compatible router is necessary.)
This setting is useful when accessing the camera from the Internet.
Auto port forwarding [On, Off]
Whether to use the router’s port forwarding function is set by selecting
[On] or [Off].
To use the automatic port forwarding function, the used router must
support UPnP and the UPnP function must be enabled.
The setting is confirmed with the [Set] button.
On Uses the router's port forwarding function.
Off The router's port forwarding function is not used.
Factory settings: Off
<NOTE>
• The port number may be changed by automatic port forwarding. If
the number is changed, the port No. of the camera registered to the
personal computer or recorder must be changed.
• The UPnP function may be used when the camera is connected to
the IPv4 network. IPv6 is not supported.
• To confirm that automatic port forwarding is correctly set, click the
[Setting status] in the advanced network setting screen [Advanced]
to confirm that the [HTTP Status] or [HTTPS Status] is set to
[Enable]. (→ page 114)
If [Enable] is not displayed, refer to “Cannot access from a web
browser” in the “Troubleshooting” section. (→ page 141)
„ z
HTTPS
Using the HTTPS function enables access to the camera to be
encrypted and communication safety to be improved.
The setting is confirmed with the [Set] button.
See page 121 for details on the HTTPS setup method.
CRT key generate
A CRT key (SSL encryption key) is generated by HTTPS.
To generate a CRT key, click the [Execute] button to display the [CRT
key generate] dialog.
For details, refer to “Generating a CRT key (SSL encryption key)”
(→ page 122).
Self‑signed Certificate ‑ Generate
A self-signed security certificate is generated by HTTPS. (Self-signed
Certificate)
To generate a self-signed certificate (security certificate), click the
[Execute] button to display the [Self-signed Certificate - Generate]
dialog and perform the operation.
For details, refer to “Generating a self-signed certificate (security
certificate)” (→ page 122).
Self‑signed Certificate ‑ Information
This displays information relating to the self-signed certificate
(security certificate).
When the [Confirm] button is clicked, the registered content of the
generated self-signed certificate (security certificate) is displayed in
the [Self-signed Certificate - Confirm] dialog.
Click the [Delete] button to delete the generated self-signed certificate
(security certificate).
CA Certificate ‑ Generate Certificate Signing Request
When using a security certificate issued by the Certificate Authority
(CA) as a security certificate for HTTPS, a Certificate Signing Request
(CSR) is generated for application to the Certificate Authority (CA).
To generate a Certificate Signing Request (CSR), click the [Execute]
button to display the [CA Certificate - Generate Certificate Signing
Request] dialog and perform the operation.
For details, refer to “Generating a Certificate Signing Request (CSR)”
(→ page 123).
114 115
Web screen configurations (continued)