Panasonic AW-UE50WP, Руководство по эксплуатации, Страница: 100 / 154

The shutter speeds that can be set are listed below.
When [Step] is selected
as the [Shutter Mode]
When [Synchro] is
selected as the [Shutter
Mode]
59.94p/59.94i
mode
1/60, 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/10000
60.0 Hz to 7200 Hz
29.97p mode 1/30, 1/60, 1/100, 1/120,
1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/8000,
1/10000
30.0 Hz to 7200 Hz
23.98p/24p
mode
1/24, 1/48, 1/60, 1/100,
1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000,
1/8000, 1/10000
24.0 Hz to 7200 Hz
50p/50i mode 1/60, 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/10000
50.0 Hz to 7200 Hz
25p mode 1/25, 1/50, 1/60, 1/100,
1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000,
1/8000, 1/10000
25.0 Hz to 7200 Hz
Factory settings: Refer to the “Camera menu item table”.
<NOTE>
• When [Shutter Mode] is set to [Off] in 29.97p, 23.98p/24p, or 25p
mode, the shutter speed is set to [1/50].
ELC Limit [1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000]
Set the maximum shutter level when ELC is operating.
Factory settings: Refer to the “Camera menu item table”.
Gain
[When [Super Gain] is [Off]: Auto, 0dB to 36dB,
When [Super Gain] is [On]: Auto, 0dB to 42dB]
The image gain is adjusted here.
In locations which are too dark, adjust the gain upward; conversely, in
locations which are too bright, adjust it downward.
When [Auto] is set, the light quantity is adjusted automatically.
The noise increases when the gain is increased.
Factory settings:
Refer to the “Camera menu item table”.
Super Gain [Off, On]
Set the super gain (increased sensitivity) mode.
Off Do not set super gain mode.
On Set super gain mode.
Factory settings: Refer to the “Camera menu item table”.
AGC Max Gain [6dB, 12dB, 18dB, 24dB, 30dB, 36dB]
When [Auto] is selected as the [Gain] setting, the maximum gain-up
amount can be set.
Factory settings:
Refer to the “Camera menu item table”.
Frame Mix [Auto, Off, 6dB, 12dB, 18dB, 24dB]
Select for frame addition (gain-up using sensor storage) amount.
When frame addition is performed, it will appear as if the images are
missing some frames.
When [Shutter Mode] is [ELC], you can set only [Auto] or [Off].
This cannot be set when [Shutter Mode] is [Step] or [Synchro].
This cannot be configured when the format is 2160/29.97p,
2160/23.98p, 2160/24p, 2160/25p, 1080/29.97p,
1080/23.98p(59.94i)
*
1
, 1080/23.98p, 1080/24p, 1080/29.97PsF
*
1
,
1080/23.98PsF
*
1
, 1080/25p or 1080/25PsF
*
1
.
* 1
AW-UE50 only
Factory settings: Refer to the “Camera menu item table”.
<NOTE>
• Under discharge tube illumination, such as fluorescent and mercury-
vapor lights, the brightness may change cyclically, colors may
change, and horizontal stripes may flow up and down the image.
• When [Frame Mix] is set to 6dB, 12dB, 18dB or 24dB, if you set
[Shutter Mode] to [ELC], [Frame Mix] is changed to [Off].
Auto F.Mix Max Gain [0dB, 6dB, 12dB, 18dB]
Sets the maximum amount of frames that can be added when [Frame
Mix] is running in [Auto] mode.
When frame addition is performed in [Auto] mode, it will appear as if
the images are missing some frames.
Factory settings: Refer to the “Camera menu item table”.
Back Light COMP. [Off, On]
Turn the backlight compensation function On/Off.
The camera compensates to make the overall screen brighter to
reduce the effect of the subject darkening due to backlight.
This is enabled when the following automatic exposure compensation
functions are set to either [Auto] or [ELC].
• When [Iris Mode] is set to [Auto]
• When [Shutter Mode] is set to [ELC]
• When [Gain] is set to [Auto]
• When [Frame Mix] is set to [Auto]
<NOTE>
• When [Spot Light COMP.] is set to [On], [Back Light COMP.] is [Off].
Factory settings: Off
Spot Light COMP. [Off, On]
Turn the spotlight compensation function On/Off.
The camera compensates to shoot bright subjects cleanly when
something like a spotlight makes the center extremely bright.
This is enabled when the following automatic exposure compensation
functions are set to either [Auto] or [ELC].
• When [Iris Mode] is set to [Auto]
• When [Shutter Mode] is set to [ELC]
• When [Gain] is set to [Auto]
• When [Frame Mix] is set to [Auto]
<NOTE>
• When [Back Light COMP.] is set to [On], [Spot Light COMP.] is [Off].
Factory settings: Off
Flicker Suppression [Off, On]
Turn the flicker suppression function On/Off.
The light that is generated under discharge tubes (such as fluorescent
lights) changes cyclically and produces a flickering effect, and this
function can reduce these issues that produce horizontal stripes in
colors.
Factory settings: Off
100
Web screen configurations (continued)