Panasonic AW-HE20KE, Руководство по эксплуатации, Страница: 113 / 126

113
Web Camera Functions
The unit can be used as a Web camera if you connect the unit and a personal computer or other device with a
commercially available USB cable.
The unit is compliant with USB Video Class and USB Audio Class. The video and audio of the unit can be transmitted
to a personal computer or other device by using communication software or other software.

Set the priority mode to “HDMI/USB" or "USB (Video Conference)" before use.

For the connection procedure, refer to “System example 3 (USB connection)”.

Audio can be output from the audio input connector [AUDIO IN] of the unit to a personal computer or other device.

If you set the Priority Mode to USB (Video Conference), you cannot output video via HDMI/SDI, and you cannot
output video via IP transmission. Also, in this mode, the audio output is forcibly turned off.
[Note]

There is no guarantee that operation will be possible with all devices that have a USB port.

IP control, IP video transmission, and PoE+ power supply can be used at the same time as these functions if you
use a LAN cable. However, some limitations will occur to IP video transmission compared with when the priority
mode is set to “IP”. For details, refer to “
Priority mode ” section.

Using the USB Video with Skype for Business
、
set the USB Video H.264 to "Disable".
Controllable functions
The following functions can be controlled when the unit is used as a Web camera.

The names of the functions are the names used in Windows. Furthermore, values are shown as decimals.

[ ]indicates the actual function names.

Please do not change the following menu during UVC output.
Priority mode, Frequency, Format, Install Position, Mirror, Mic
Image adjust
[Brightness] >[Picture level]
This can be set in the same way same way as “Picture level” of the menus and Web settings.
Setting range: -4, -3, -2, -1, 0, 1, 2, 3, 4
Chroma level [Chroma level]
This can be set in the same way same way as “Chroma level” of the menus and Web settings.
Setting range: 0 to 10
Equivalent to –3 to +3 of “Chroma Level”.
If the scene mode is set to “Full Auto”, even if this setting is changed, the change will not be reflected on the unit.
White balance [White Balance mode]
This can be set in the same way same way as “White Balance mode” of the menus and Web settings.
Setting value: ATW, AWB A, AWB B, 3200K, 5600K