72
Nonlinear editing
Nonlinear editing of video data on memory cards
can be performed by connecting the camera via the
USB2.0 connection cable to a computer for editing
(Page 68).
Use a sufficiently charged battery or the AC
adaptor.
The following conditions are necessary for USB
connection.
•
PC with Windows XP, Windows Vista, or
Windows 7, or Macintosh with Intel CPU (Intel
Mac)
•
USB2.0 (High Speed, Mass Storage Class)
compatibility (not compatible with USB1.1)
•
Only connect to one computer at a time.
•
Camera cannot be operated if a hub or other
device is connected between the camera and
computer.
1
Insert a memory card into the camera, and
turn the POWER/MODE switch of the camera
2
Connect the camera to a computer with a
USB2.0 connection cable.
Turn on the power of the computer before
connecting.
3
Select [PC].
Dubbing can be performed to a Blu-ray Disc
Recorder, etc. by selecting [RECORDER].
4
Perform nonlinear editing on the computer.
The contents of the memory card will appear as
a removable disk icon within My Computer or
the desktop on the computer screen. (Page 73)
(Example) Windows
Removable disk (E:)
(Example) Macintosh
NO NAME
•
When copying files from the camera to a
computer, take care to ensure that files are
not accidentally overwritten.
•
For more details, refer to the operating
instructions of your computer editing software.
•
When changing memory cards, always ensure
that the access lamp is not flashing and
that the memory card is not currently being
accessed.
•
Camera functions cannot be used when the
camera is connected to a computer.
•
Always perform “safe hardware removal”
when disconnecting the cable.
•
The data on the memory card cannot be
accessed when the memory card slot cover is
open.
•
If you use the battery and connecting a USB
cable, no output will be performed from
<SDI OUT>, <HDMI>, and <VIDEO OUT>
terminals. When USB cable is connected,
a message appears and then disappears
on the LCD monitor and viewfinder, which
is displayed again when operating the
OPERATION lever. (This does not occur when
connecting an AC adaptor.)
5
Turn off the power of the camera.
•
If the camera cannot be correctly recognized
by the computer, you may be able to remedy
that by one of the following methods.
- Turn the power of the camera and the
computer off and back on again.
- Remove the memory card from the camera
and reinsert it.
- Connect to a different USB2.0 terminal on
the computer.
•
If you are using an SDXC memory card, some
computers may not recognize the data. Make
sure your computer supports SDXC cards.
Содержание AVCCAM AG-AC160EJ
Страница 110: ...2011 ...
