manualshive.com logo in svg

Panasonic AVCCAM AG-AC160EJ, Руководство по эксплуатации

Поделиться
Скачать
Panasonic AVCCAM AG-AC160EJ Скачать руководство пользователя страница 19

19

Shooting

Adjusting the iris

IRIS ring

<IRIS> button

<AUTO/MANU> switch

1 

Use the <AUTO/MANU> switch, to switch to 

manual mode. (Page 18)

2 

Press the <IRIS> button to switch the lens 

aperture adjustment method.

[AUTO IRIS]: (auto iris)

Automatically adjusts the iris value.

[MANUAL IRIS]: (manual iris)

Manually adjusts lens aperture.

3 

When manual iris is on, adjust the lens 

aperture by turning the IRIS ring.

• When auto iris is on , use this ring to correct 

lens aperture.

 

•

When [ON] is selected in the [A.IRIS] item on 
the setup menu [AUTO SW] screen, during auto 
mode, auto iris is turned on forcibly. (Page 88)

 

•

See the display on the IRIS METER display 
for the status of the light intensity. See page 79 
regarding IRIS METER display.

• Regarding the F values when the lens aperture 

is open on this camera, [F1.6] is the wide angle 
side (W) end, and [F3.2] is the telescopic side 
(T) end. In the iris display displayed on the 
viewfinder and the LCD monitor when the lens 
aperture is open, [OPEN] is displayed on the 
wide angle side (W) end, and [F3.2] or [OPEN] 
is displayed on the telescopic side (T) end.

• When the iris is near closed, resolution goes 

down due to light diffraction. In this case, you 
can improve things by adjusting shutter speed, 
and not letting the iris close.

Using focus assist

When you press the <FOCUS ASSIST> button, the 
screen border turns red and the image contour has 
red edges. Adjust the focus so that the contour of 
the subject you want to focus on becomes red.

<FOCUS ASSIST> button

 

Содержание AVCCAM AG-AC160EJ















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды