Panasonic AVC ULTRA AJ-UPX36OED, Руководство по эксплуатации

Страница: 126 / 210

– 126 –
Chapter 5 Shooting — Image quality adjustment
r General settings
Use the camera with the factory settings.
r Advanced settings
Set with the [SCENE FILE] menu → [RB GAIN CONTROL SETTING].
f When the <WHITE BAL> switch is at the <PRST> position
[R GAIN AWB PRE]: Sets to add or reduce the intensity of the red color.
[B GAIN AWB PRE]: Sets to add or reduce the intensity of the blue color.
f When the <WHITE BAL> switch is at the <A> position
[R GAIN AWB A]: Sets to add or reduce the intensity of the red color.
[B GAIN AWB A]: Sets to add or reduce the intensity of the blue color.
f When the <WHITE BAL> switch is at the <B> position
[R GAIN AWB B]: Sets to add or reduce the intensity of the red color.
[B GAIN AWB B]: Sets to add or reduce intensity of the blue color.
f When performing automatic white balance by setting the <WHITE BAL> switch to the <A> position
[AWB A GAIN OFFSET]: Sets whether to keep or reset the values set for [R GAIN AWB A] and [B GAIN AWB A].
f When performing automatic white balance by setting the <WHITE BAL> switch to the <B> position
[AWB B GAIN OFFSET]: Sets whether to keep the values set for [R GAIN AWB B] and [B GAIN AWB B] or reset them.
Chroma setting function
This function sets color saturation and phase. It applies effects on whole images. It cannot be set to individual color hue.
r General settings
[CHROMA LEVEL]: Sets the chroma level of the P
R
signal and P
B
signal. When the vector scope is used, the distance from the center (no color) is
increased or decreased for the entire image.
[CHROMA PHASE]: Finely adjusts the chroma phase of the P
R
signal and P
B
signal. When the vector scope is used, the whole image rotates clockwise
or counter-clockwise.
r Advanced settings
No setting items are provided.
Matrix function
This function sets the image color representation by selecting the matrix table. If the settings are changed, the representation of all the colors in the
image will also be changed.
The change in color against each axis of matrix is as following figure.
f The bold line in the figure is the reference line for each axis of matrix. The color above the bold line does not change.
R Mg
G Cy
B Yl
R Mg
G Cy
B Yl
R Mg
G Cy
B Yl
R Mg
G Cy
B Yl
R Mg
G Cy
B Yl
R Mg
G Cy
B Yl
(R-G)
(R-G)
(G-B)
(G-B)
(B-R)
(B-R)
(R-B)
(G-R)
(G-R)
(B-G)
(B-G)
(R-B)
r
General settings
[MATRIX TYPE]:
Selects the matrix table to represent the color for shooting.
r Advanced settings
Set with the [SCENE FILE] menu → [MATRIX SETTING].